|
Remco 90-3214-1E1-82B-SB 3200 AG Series On-Demand Sprayer Pump — 12V DC, 3.5 GPM, 60 PSI, ¾" QA Female Ports
Professional-grade 3-chamber on-demand agricultural sprayer pump with IP65-sealed motor and ¾" Quick Attach female ports. 3.5 GPM at 60 PSI. Compatible with herbicides, fertilizers, and insecticides. Not for potable water. Made in the USA.
Why Choose the Remco 90-3214-1E1-82B-SB?
The Remco 3200 AG Series bridges the gap between the compact 3300 Series and the higher-output 5500 Series — delivering 3.5 GPM at 60 PSI in a lightweight, efficient package. The 90-3214-1E1-82B-SB is the standard on-demand configuration with ¾" Quick Attach female ports, purpose-built for agricultural spraying, liquid fertilizer application, and industrial fluid delivery where moderate-to-high flow rates are needed without the added weight and cost of a larger pump.
Engineered with Professional Grade components for long and continuous duty cycles, the 3200 AG Series features an ultra-efficient motor design that keeps operating amperage and heat low — making it ideal for battery-powered ATV, UTV, and truck-mounted sprayer systems where power conservation matters. The ¾" Quick Attach ports snap hoses on and off in seconds for fast chemical changeovers in the field.
Powered by Remco's signature completely sealed 12V DC motor with IP65 ingress protection, this pump handles the harshest outdoor environments. Standard Viton valves and Santoprene diaphragm provide excellent compatibility with the most common herbicides, fertilizers, and insecticides.
⚠️ Important: This pump is not listed for potable water use and must never be used with gasoline or any petroleum products. For freshwater RV or drinking water applications, see Remco's PowerRV or Rebel pump series.
💧 3.5 GPM at 60 PSI
Higher flow than the 3300 Series — bridges the gap between compact and high-volume pumps for medium-sized ag spray systems
🔌 ¾" Quick Attach Ports
Fast-connect female QA inlet and outlet — snap hoses on and off without tools for quick chemical changeovers in the field
🌧️ IP65 Sealed Motor
Dust-tight and water-jet resistant — ultra-efficient design for low heat and power consumption in the field
🔋 Low Amp Draw
Just 10 Amps max — highly efficient for ATV, UTV, and truck-mounted battery-powered sprayer systems
🚫 NOT for Potable Water — NOT for Petroleum Products
The Remco 90-3214-1E1-82B-SB is not listed or approved for potable water use. Do not use this pump in any system where the fluid may be consumed by humans or animals.
This pump must NEVER be used with gasoline, diesel, or any petroleum-based products. Use only with water-based agricultural chemicals, liquid fertilizers, and other compatible non-flammable fluids. For potable freshwater applications, see Remco's PowerRV or Rebel pump series.
📍 Typical Applications
The 90-3214-1E1-82B-SB is designed for medium-flow agricultural and industrial sprayer systems using ¾" QA hose connections:
Agricultural & Chemical:
• ATV, UTV, and truck-mounted boom sprayers
• Spot spray and field sprayer systems
• Liquid fertilizer application and transfer
• Soft washing and bleaching operations
• De-icing fluid application
Industrial & Municipal:
• Equipment washdown
• Dust suppression systems
• General industrial fluid delivery on ¾" QA hose systems
• Road maintenance and liquid transfer
Key Features & Benefits
-
3-Chamber Diaphragm Design: Three chambers deliver smooth, consistent flow at 3.5 GPM — more output than the 3300 Series for medium-scale sprayer applications
-
3.5 GPM Maximum Flow at 60 PSI: Mid-range agricultural pump output for boom sprayers, field sprayers, and moderate-demand liquid transfer
-
Standard (E1) Material Set: Viton valves and Santoprene diaphragm optimized for the widest range of common agricultural spray chemicals
-
On-Demand Pressure Switch Control: Pump runs when flow is open, shuts off automatically when nozzles close — simple and reliable for all spray applications
-
¾" Quick Attach Female Ports: Fast-connect inlet and outlet for tool-free hose connection and removal — snap on, snap off for quick chemical changeovers in the field
-
Completely Sealed 12V Motor: IP65-rated motor is dust-tight and protected against water jets — built for outdoor field conditions
-
Ultra-Efficient Motor Design: Low heat and power consumption — operates at just 10 Amps max for excellent battery life on ATV, UTV, and truck-mounted systems
-
Heavy 14 AWG Lead Wires: 6" leads for direct relay or controller connection with minimal voltage drop at full load
-
Run Dry Capable: Safe to operate without fluid — no damage from a momentarily empty tank or purged line
-
Self-Priming up to 10 Feet: Greater prime capability than the 3300 Series (8 ft) — more flexibility in mounting location above the fluid source
-
Viton Valves / Santoprene Diaphragm: Chemically resistant materials compatible with herbicides, fertilizers, insecticides, and most water-based ag chemicals
-
100% Factory Tested: Every unit verified to Remco's performance specifications before shipping
-
Made in the USA: Professional-grade American-made components throughout
Technical Specifications
| Retail Model Number |
90-3214-1E1-82B-SB |
| OEM Part Number |
3214-1E1-82B |
| Brand |
Remco Industries |
| Series |
3200 AG Series |
| Motor Type |
12 VDC Permanent Magnet, Sealed, Intermittent Duty |
| Voltage Range |
11.5–14.5 VDC |
| Maximum Amperage |
10 Amps at 60 PSI |
| Recommended Fuse |
15 Amp |
| Wire Leads |
14 AWG, 6" long |
| Ingress Protection |
IP65 |
| Pump Type |
3-Chamber Diaphragm |
| Material Designation |
Standard (E1) — Viton / Santoprene |
| Control Type |
On-Demand (Pressure Switch) |
| Maximum Flow Rate |
3.5 GPM (13.25 LPM) |
| Pressure Setting |
60 PSI (4.1 Bar) |
| Inlet / Outlet Ports |
¾" Quick Attach Female |
| Valve Material |
Viton |
| Diaphragm Material |
Santoprene |
| Housing Material |
Nylon |
| Vertical Prime |
Up to 10 ft (3.0 m) |
| Run Dry |
Yes |
| Max Liquid Temperature |
140°F (60°C) |
| Max Motor Temperature |
180°F (82°C) |
| Chemical Compatibility |
Herbicides, fertilizers, insecticides, water-based ag chemicals |
| Potable Water Use |
Not Approved — Not for Drinking Water |
| Petroleum/Fuel Use |
NOT Compatible — Never use with gasoline or petroleum |
| Dimensions (L x W x H) |
8.2" x 4.8" x 4.0" |
| Weight |
4.6 lbs |
| Country of Origin |
Made in the USA |
| Warranty |
1-Year Limited Manufacturer |
📋 Installation Overview
On-demand setup — pump runs when flow is open, stops when closed.
1. Mount the Pump: Secure to your sprayer frame or mounting surface. The pump can be mounted in any orientation but should be located no more than 10 feet above the fluid source for reliable priming.
2. Connect Plumbing: Snap your ¾" Quick Attach hoses directly onto the inlet and outlet ports — no tools or thread tape needed. Use appropriate hose clamps on the hose barb side of your QA fittings.
3. Electrical Connection: Connect the 14 AWG leads to your 12V DC supply via relay. Protect the supply line with a 15 Amp fuse as close to the power source as possible. A relay is recommended — do not switch the pump load through a small toggle switch directly.
4. Prime & Test: Fill the inlet line with fluid before starting to assist prime. Run briefly to purge air, then check all fittings for leaks at operating pressure.
Note: The pump will prime only if all pressure is relieved from the outlet port before starting. Contact Remco at 1-800-228-2481 for wiring or installation guidance.
📦 What's Included
In The Box:
• 90-3214-1E1-82B-SB 3200 AG Series Pump
• Mounting hardware
NOT Included (Will Need Separately):
• ¾" Quick Attach hoses and fittings
• 15 Amp inline fuse and fuse holder
• Relay (recommended)
• Hose and hose clamps
• Inlet strainer / filter (recommended to protect pump from debris)
🛡️ Warranty Information
The 90-3214-1E1-82B-SB is covered by Remco Industries' 1-Year Limited Manufacturer's Warranty from the date of manufacture (or 1 year from date of purchase with proof of purchase). Remco will repair or replace, at their discretion, any unit found defective in materials or workmanship under normal use.
Warranty does NOT cover:
• Misuse, abuse, misapplication, or external damage
• Use with gasoline, flammable liquids, or incompatible chemicals
• Products altered outside the Remco factory
• Normal wear, brush wear (may be limited to 1,000 hours), or appearance
Warranty returns require a Return Material Authorization (RMA) number from Remco prior to shipping any product back.
System Compatibility Reference
|
|
|
