INSECO Paver Sealer Stripper Sprayable

PSR Paver Sealer Remover is an environmentally friendly, biodegradable, low odor
paint stripper designed to remove multiple layers of various types of coatings. PSR
contains no Methylene Chloride, N-Methyl Pyrolidone or caustics. PSR performs
by penetrating and softening the paint film. The all natural and biodegradable
characteristics make PSR safe, easy to use and practical for most stripping
applications. PSR will not damage tools and equipment like most chemical
strippers. Available in both spray and gel formulations.

RECOMMENDED USES:
PSR will remove most sealers, paints and varnishes, both solvent and water based, including latex products, acrylics, alkyds, stains,
lacquers, urethanes, epoxies and more. It may be applied to virtually any substrate and will not damage the substrate nor will it harm
the environment or be detrimental to animals or humans.
APPLICATION INFORMATION:
Before applying PSR, insure all areas not being stripped are fully protected. PSR should be applied directly from the container using
a brush, roller or spray. PSR is not as eective when applied to a hot surface. If the area being stripped is in direct sunlight, covering
the area with plastic is recommended after applying the PSR to avoid evaporation. PSR is not harmful if it contacts the skin, however,
neoprene gloves and goggles are recommended. Contact with PSR may cause skin irritations.
1. Apply a liberal amount of PSR to the surface requiring stripping.
2. Work PSR into grooved areas.
3. Allow PSR to stand for a minimum of 20-30 minutes. Weather conditions, type of coating being removed and coating thickness
will determine how long PSR must dwell for stripping action to develop.
4. After softening of paint film begins and film starts to wrinkle or blister simply scrape or pressure wash film o of the substrate.
5. Water will deactivate the stripper.
6. Do not allow PSR to dry prior to removing it. PSR deactivates when it dries.
7. Additional applications of PSR may be required to remove multiple layers of paint or stubborn coatings.
8. After stripping, substrate should be washed with a degreasing detergent. OxyClean is a recommended cleanser.
CLEAN UP:
Clean tools and equipment with soap and fresh water.
COVERAGE (THEORETICAL):
Coverage will vary depending on coating thickness, surface porosity and surface contour. Coverage typically averages 150-200 feet
per gallon.
CAUTION: KEEP OUT OF REACH OF CHILDREN! WARNING! If you scrape, sand or remove old paint, you may release lead dust.

LEAD IS TOXIC. EXPOSURE CAN CAUSE SERIOUS ILLNESS, SUCH AS BRAIN DAMAGE, ESPECIALLY IN CHILDREN. PREG-
NANT WOMEN SHOULD ALSO AVOID EXPOSURE. Wear an NIOSH approved respirator to control lead exposure. Carefully cl ean

up with a HEPA vacuum and a wet mop. Befor e you start, find out how to protect yourself and your family by contacting the Nation-
al Lead Information Hotline at 1-800-424-LEAD or log on to www.epa.gov/lead.