Dyne Poly Chain 10GPM at 3000PSI GP Pump with Honda IGX800

Dyne Power Pack Poly Chain Drive with GP Pump

8gpm TSF2221 at 3000psi Honda IGX800 Motor

ILL-1030-G-GPP

Poly Chain Driven Unit.

• Both the motor and pump have custom length oil drains installed to allow for fast and easy maintenance. Any length on the oil drains can be manufactured in house to fit any configuration, upon request.

• Our Dyne Power packs come standard with lead acid AGM batteries. This battery is conveniently approved for all modes of transport. VRLA technology eliminates spills and over pressurizing. The battery cables provided with the machine are manufactured in house to a standard 48” length; however, any length desired is available upon request.

• The V-Belt driven power packs will have a cogged four groove banded belt. This gives us a better grip and bite on the pulleys and helps reduce friction heat. A fabric covers the belt body for extreme abrasion and wear resistance. The banded V-belt is more resistant to tensile and flexing forces, assisting with shock load and fatigue. Grade 8 bolts have been installed on the drive pulleys, giving a more secure taper lock to eliminate walking.

• Dyne Power Packs one-piece belt covers are Aircraft grade aluminum, brake formed and welded. The tapered cover allows for easy extraction without removing the muffler. Strategically placed louvers allow air flow through the belt cover, allowing the belt to remain cool. A polyester powered coat is applied to the cover giving extra resistance and further protection, enabling the cover to withstand the elements.

• Dyne's base is comprised of A36 structural steel with generous brake formed bends for a strengthened radius. Each hole is CNC drilled to ensure accuracy. The base is sand blasted, primed, and polyester powered coated. With rubber isolators installed, we achieve a base height of 4” inches allowing easy access to the undercarriage.

Overall dimensions will be 20” W x 27” L x 23” H, - a compact for a unit in this class.
 

• The belt tensioning system is manufactured in house using 1”x 1/8” steel angle for the brackets with welded cage nuts for easy installation. Our Tension rods are 3/8” stainless steel. The tension is pulled from the back of the pump using a push-pull system, enabling the pump to remain in a straight line with the motor.

• Dyne units are capable of running a dual gun set-up, pending unloader choice. In addition, we are pleased to offer block mount unloaders with jumper hoses, if requested. All plumbing configurations can be changed upon request, along with the client’s choice of pump.

• One 6-gallon marine grade fuel tank comes standard with each unit (49-state approved). This fuel tank is a complete assembly, including feed and return lines with check vales and quick connect fittings installed. If needed, a 50-state approved tank can be provided.